today was kinda irritated at work today.
as mentioned previously, we're onto Sheet Metal module. not really an easy module overall coz of the precision and hardwork involved.
and so, we're onto Project 2 now. somewhat more harder than the 1st one. i mean the first one was likka teaser.. to get used to the feel of doing sheet metal work.
so we've done the cutout, layout, bending, rolling and stuff.. today we're onto mounting it on the "aircraft" frame. so, usually before we start the next phase of work, the instructor will do likka a demo.
was kinda upset and abit irritated coz he used mine. dont get me wrong, he's really a pro and experience instructor who teaches really well, and i dont mind. but coz we're all in a rush as we had half a work day less due to CNY hols, he was rushing abit. so yea, to do a demo fast, u'd do it fast at the expense of precision since it's just a demo.
so yea, became upset coz all my effort of measuring precisely gone to waste.
what's worse is, coz we've bent 2 pieces of metal, one at 85 deg one at 95 deg... then we're supposed to mount it together on a rolled piece of metal....he took the wrong piece and mounted on to it, along with it, i've driven all the pilot holes for the rivets with the clamps and all alrdy. that's something that u cant really undo. and because it is tedious to unmount all the clamps to reposition it, he didn't want me to do it coz waste time.
so after the demo is done and all, he walked away while i stood there, staring at my piece trying to reconcile with my OCD self, telling myself that its ok its ok, its just a pracitce and its not graded, yet. i mean, u wouldn't understand this if u're not a perfectionist. in addition, i dont really get to practise the whole thing on my own. and so, one of my batch boys asked me upon looking at my blank face," what's up?" so i was like.. "sigh.. he anyhow do then not precise alrdy loh." then boys being boys, being insensitive and all said "get over with it, dont just stand there and watch it coz it wont change" i was abit upset when he said that, i know he meant no harm. but after a few mins later he exclaimed suddenly while working on his piece like "aiya.. not straight alrdy!"
thanks bro.
ok, maybe its me and my pms or what, but i was like wth. u can complain so i cant la. ok. i was really bitch mode on alrdy. but had to maintain.
AND on the other hand, while i was struggling to get used to all the imperfect measurements done hastily not by me, we've got another collegue who drilled the wrong hole on his own work piece. so i was like, the instructor should have used his work for demo man. besides, he would love it coz he would be able to finish his work fast with less effort. this guy, i really have issues with him since Day 1 we met. . its been an ongoing thing alrdy and sometimes i wonder how did he ever get pass the initial job interview. seriously.
u know, in the beginning, we all had to work in teams to cut out the respective materials. i had a feeling that confirm something sure go wrong one. but i felt very mean to think of him like that. but true enough, his group cut the material wrongly due to some incorrect grain alignment. and when i say material, i mean like a 1.2m x 1.2m aluminium sheet. it huge and its not cheap. so in the end, can't use the material and the instructor gotta get another piece. ok. nvm.
and from that new sheet, pieces of 17" x 6.3" was supposed to be cut out. in the end, duno is it never pay attention or due to a total lack of concern, the pieces came out to be 17" x 6.5".
at least put some effort in ur work pls, especailly if it concerns others.
duno pls ask. dont assume like u know' or anyhow try to go full steam ahead in getting the end product w/o actually carrying out the procedures to get things right. we're like in trng now, and if u dont do it now, i will not believe if u say u're gg to do it while u're at the real thing.
so today, really a frustrating. i teared abit in my corner and its something that i really need to change. realized that its been awhile that my remedy to relive the inner frustration is crying and that's not good. i mean, its not that i care of being weak and all, but i dont think its socially nice to cry like that especially in a male dominated work area. it is inconvenient and just.... unnecessary. but guys are really......... sometimes they ask u "whats up" / "how are u" out of that spur of random concern. then when you reply or care to elaborate abit more... they'll start complaining to you.. "dont complain".
its really an paradox and i just hate these.
back at it, actually its just me being irritating as well la. i can choose not to bother, but sometimes as a human, i think i care too much. plus, that OCD chromosome inside me is not helping.
this all really sucks. sometimes also, i feel that i help ppl too much that not only do i not get appreciated, i get mocked at, even though it means going through inconvenient ways just to help. y bother to go to such extend, know that u'd not get anything in return. i mean, if the person is happy (no need to be appreciative), fine. but if in the end, the peson feels either offened/ intruded, then... what's the point. if i take initiative, ok, fine, my bad. but if u're the one who sounded out for help.... ok... now what?
really can't tahan selfish ppl who's probbably got some issues in life. i am mean, but just give it to me la. i needa break.
seriously!
in times like this, i really miss my OCD bro who now at the other side of changi doing his e&i module. really miss him and really miss having someone to converse as a friend or at least as a legit human and not like another standard collegue / girl / whatsoeva. its not that i want to always hear the good things or what, but sometimes, u just need someone to understand and keep you in check. i know i can't be depending on him as well since we're not gg to be together for long.
recently, i've also been trying to hold back abit. i mean, we've set the platform and we're all clear and good. perhaps its me being oversensitive, but i guess i need to? i dont think things are thatttttt complicated, but sometimes i guess i need to take the necessary precautions because, people around may tend to complicate and exaggerate with things which then can be unnecessarily harmful.
sometimes we all need to just forget ourselves abit more, suffer abit more, tolerate abit more and complain less.
i will definitely need to work on being cooler, ie, not letting all my facial expressions amplify my thoughts and feelings. all along, i know i'm a person who can't hide my feelings nor control my facial expressions, and since controlling ur inner most expressions may not be possible at this level, i guess lets just work on the exterior first.
sigh.
i guess its all about being bottled up.
sometimes i need to also remind myself not to put in so much effort in friendships coz at the end of the day, we're all just colleagues and perhaps, that's how others see u as well. so really no point committing or even "investing" on others. it's not worth it.
well on a side note, i've also learnt that it doesn't pay to be honest.
with honesty, not only do we get misjudged, we lose things that meant alot to us.
as of date, i've lost ppl close to my heart becoz of honesty. then again, if they don't recognize the essence of honesty in itself, then i guess its worth to lose the friendship?
with honesty comes with opportunity cost as well. because of this, we lose that.
so i guess,
the best is to just stfu. do what u're needed to do. help only when asked.period.
best is to start having a selfish / self-centred mindset so its not too taxing.
well, at the end of the day, i guess i'm still glad i'm not doing office job.
today, had lunch with some of my ex-collegues and its always nice to hear them lamenting on all the office politices. hahas. also, another ex-collegue came to ask me to help him on some of this planning/ analysis with excel. kinda secretly like doing this kind of data analysis / fault finiding / productivity improvement kinda shit. i think it poses some kind of challenge uh. hahahas.
but the sad thing is, such things comes with a deadline and always an urgent one. so yea. gonna be working on this.
No comments:
Post a Comment